<small>Certificate in </small><span>Horticulture (Horticultural Technology)</span>


Certificate in Horticulture (Horticultural Technology)

Course Code VHT002T
Qualification Certificate
Payment Options Upfront & Payment Plans
Delivery Online & Correspondence
Duration 700 Hours

“Want to work in hydroponics? You will need more than just knowledge of hydroponic growing systems. This excellent and comprehensive course covers the general horticultural knowledge required for successful plant growing (irrelevant of the method) in the first 15 lessons then focuses on hydroponics in the second half.”
 

Home Studies: Hydroponic Growing Systems, Plant Breeding, Growing Plants and General Horticulture

....all wrapped up in the one course; providing a great foundation for starting a hydroponic or plant breeding business, or starting a career in modern horticulture.

“Want to work in hydroponics? You will need more than just knowledge of hydroponic growing systems. This excellent and comprehensive course covers the general horticultural knowledge required for successful plant growing (irrelevant of the method) in the first 15 lessons then focuses on hydroponics in the second half.” - Adriana Fraser Cert.Hort., Cert.Child Care, Adv.Cert.App.Mgt., Cert 1V Assessment and Training, Adv.Dip.Hort, LC Tutor.


CORE UNITS

Students must complete and pass all of these core units.

1. Introduction to plants Minimum 40 hours instruction

The purpose of this study area is to explain the binomial system of plant classification and demonstrate identification of plant species through the ability of using botanical descriptions for leaf shapes and flowers.

Objectives

  • Describe the relevant identifying physical features of flowering ornamental plants.
  • Demonstrate how to use prescribed reference books and other resources to gain relevant information.
  • Dissect, draw and label two different flowers.
  • Collect and identify the shapes of different leaves.
  • Demonstrate how to identify between family, genus, species, variety and cultivar.

2. Plant culture Minimum 60 hours instruction

The purpose of this study area is to demonstrate the ability to care for plants so as to maintain optimum growth and health while considering pruning, planting, and irrigation.

Objectives

  • Describe how to prune different plants.
  • Demonstrate how to cut wood correctly, on the correct angle and section of the stem.
  • Describe how to plant a plant.
  • Demonstrate an awareness of different irrigation equipment, sprinklers, pumps and turf systems available by listing their comparative advantages and disadvantages.
  • Demonstrate competence in selecting an appropriate irrigation system for a garden, explaining why that system would be preferred.
  • Define water pressure and flow rate and how to calculate each.
  • Explain the need for regular maintenance of garden tools and equipment.
  • List factors that should be considered when comparing types of machinery for use in garden maintenance.

3. Soils and plant nutrition Minimum 50 hours instruction

The purpose of this study area is to provide students with the skills and knowledge to identify, work with, and improve the soil condition and potting mixes, and to evaluate fertilisers for use in landscape jobs to maximize plant growth.

Objectives

  • Describe the soil types commonly found in plant culture in terms of texture, structure and water-holding and nutrient holding capacity.
  • Describe methods of improving soil structure, infiltration rate, water holding capacity, drainage and aeration.
  • List the elements essential for plant growth.
  • Diagnose the major nutrient deficiencies that occur in ornamental plants and prescribe treatment practices.
  • Describe soil pH and its importance in plant nutrition.
  • Describe the process by which salting occurs and how to minimise its effect.
  • Conduct simple inexpensive tests on three different potting mixes and report accordingly.
  • Describe suitable soil mixes for container growing of five different types of plants.
  • List a range of both natural and artificial fertilizers.
  • Describe fertilizer programs to be used in five different situations with ornamental plants.

4. Introductory propagation Minimum 40 hours duration

The purpose of this study area is to improve the student's understanding of propagation techniques with particular emphasis on cuttings and seeds. Other industry techniques such as grafting and budding are also explained.

Objectives

  • Demonstrate propagation of six (6) different plants by cuttings and three from seed.
  • Construct a simple inexpensive cold frame.
  • Mix and use a propagation media suited to propagating both seed and cuttings.
  • Describe the method and time of year used to propagate different plant varieties.
  • Describe and demonstrate the steps in preparing and executing a variety of grafts and one budding technique.
  • Explain the reasons why budding or grafting are sometimes preferred propagation methods.

5. Identification and use of plants Minimum 60 hours instruction

The purpose of this study area is to improve the student's range of plant knowledge and the plant use in landscaping and the ornamental garden, and the appreciation of the different optimum and preferred growing conditions for different plants.

Objectives

  • Select plants appropriate for growing in different climates.
  • Select plants appropriate to use for shade, windbreaks, as a feature, and for various aesthetic effects.
  • Categorise priorities which effect selection of plants for an ornamental garden.
  • Explain the differences in the way plants perform in different microclimates within the same area.
  • List and analyze the situations where plants are used.

6. Pests, diseases and weeds Minimum 50 hours instruction

The purpose of this study area is develop the student’s ability to identify, describe and control a variety of pests, diseases and weeds in ornamental situation, and to describe safety procedures when using agricultural chemicals.

Objectives

  • Explain in general terms the principles of pest, disease and weed control and the ecological (biological) approach to such control.
  • Explain the host‑pathogen‑environment concept.
  • Describe a variety of pesticides for control of pests, diseases and weeds of ornamental plants in
  • terms of their active constituents, application methods, timing and rates, and safety procedures.
  • Photograph or prepare specimens, identify and recommend control practices for at least five insect  pests of ornamental plants.
  • Photograph, sketch or prepare samples, identify and recommend control practices for three non‑insect ornamental plant health problems (e.g. fungal, viral, bacterial).
  • Describe the major ways in which diseases (fungal, viral, bacterial and nematode) affect turf, the life cycle features that cause them to become a serious problem to turf culture and the methods available for their control.
  • Identify, describe and recommend treatment for three different weed problems.
  • Collect, press, mount and identify a collection of ten different weeds, and recommend chemical and non-chemical treatments which may be used to control each.
  • List and compare the relative advantages and disadvantages of different weed control methods.

STREAM UNITS

There are ten lessons as follows:Hydroponics I

  1. Introduction
  2. How a Plant Grows
  3. Hydroponic Systems
  4. Nutrition & Nutrition management
  5. Plant Culture
  6. Hydroponic Vegetable Production
  7. Hydroponic Cut Flower Production
  8. Solid Media vs Nutrient Film
  9. Greenhouse Operation & Management
  10. Special Assignment

Hydroponic Management

There are eleven lessons as follows:

  1. How the Crop Plant Grows
  2. How to Run a Small Evaluation Trial
  3. Harvest and Post Harvest
  4. Tomatoes
  5. Capsicum
  6. Lettuce, Salad Greens and Foliage Herb Crops
  7. Cucurbits (Cucumber and Melons)
  8. Strawberries
  9. Roses
  10. Carnations
  11. Orchids

Plant Breeding

There are 7 lessons in this module as follows:

  1. The Scope and Nature of the Plant Breeding Industry
  2. Introduction to Genetics
  3. Gamete Production, Pollination and Fertilisation in Plants
  4. Mono Hybrid and Dihybrid Inheritance in Plants
  5. Systematic Botany and Floral Structures
  6. Practical Plant Breeding Techniques
  7. Current Developments in Plant Genetics
Finance options

If you are an Irish citizen you may be eligible to receive financial support, meaning you can defer payment of your course fees. Additionally, if you are a resident of Ireland, you may also be eligible to receive a student grant under the Student Grant Scheme

Student support

We live in a society where the pressures of daily living are high with financial expenses, personal and work commitments, and mortgage and rental obligations. Then there are the unexpected life challenges that also get thrown our way. With this in mind the thought of taking on study can be daunting for most people. Here at Learning Cloud we understand that life doesn’t run in a straight line it has many ups and downs.

As an enrolled student at Learning Cloud, you are entitled to access a variety of non-academic support services from the Student Services Unit. These supports are designed to walk beside you throughout your studies they will assist you in life’s ups and downs to provide you the best opportunity to successfully complete your chosen course.

STUDENT SERVICES PROGRAMS INCLUDE:

  • Careers Counselling Service
  • General Counselling Service
  • Disability Liaison Service
  • Retention & Engagement Service
  • Student Activities
  • Accommodation
  • E Counselling
  • Your-Tutor
  • Parent support
  • Reasonable Adjustment Plan (RAP)

Call our student support today on 041 214 0000 or Email Faculty

Get more information

Want more information about financial and student support? Fill out the enquiry form to the right and a study consultant will contact you with the details you need.

How will this course advance my career?

Learning Cloud programs have been developed in response to industry demand and are specifically designed to equip graduates with work-ready skills. Each participant will be trained and assessed in theory and in practical tasks and Real-world exercises are used throughout the program.

Studies prove, time and again, that college-educated workers earn more than those with only a high school qualification. College graduates often enjoy additional benefits, including greater job opportunities and promotions. Though the proof for greater earning potential exists, some might wonder whether the cost of the education warrants the overall expense in the long run.

College Graduate vs. Non-Graduate Earnings

The National Centre for Education Statistics (NCES) analyses employee earnings data biennially, according to education level. Findings indicate that workers with a qualification earn significantly more than those without. Since the mid-1980s, education has played a large part in potential wages, with bachelor's degree holders taking home an average of 66% more than those with only a high school diploma do. While college-educated workers' wages have increased over the past two decades, those with only a high school education have seen decreases in annual salaries in the same time period (nces.ed.gov).

How else will I benefit from studying with Learning Cloud?

  • Studying online or distance means you can study where you want and at your own pace.
  • Receive career-focused training with practical, hands-on learning.
  • All course materials are provided and all digital platforms are interactive, work on any device and designed to be fun.
  • Recognition of Prior Learning or Skills Recognition may be available for previous work experience, formal training or qualifications in this field.

THANK YOU